Being the all-in-one concept, eVic AIO features an interchangeable plate, top refilling, top airflow control system and multiple coil options.
Notice: Joyetech now requires S/N (serial number) before providing replacements (due to counterfeits in market).
We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
Shipping restriction: due to exclusive distributor of Joyetech, we do not send Joyetech products to customers in Russia, South Korea or UK.
75W Joyetech eVic AIO VT Kit W/O Battery
Being the all-in-one concept, eVic AIO features an interchangeable plate which allows to replace the battery or atomizer easily. eVic AIO adopts the best anti-leaking structure with top refilling and top airflow control system. Large 0.96-inch OLED screen, colorful stickers and multiple coil options all make it more practical and attractive catering to your preference. Also, upgradable firmware always enables it up-to-date.
Output Mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR
Output Wattage: 1-75W
Resistance range: 0.05 - 1.5ohm under VT/TCR mode; 0.1 - 3.5ohm under VW/Bypass mode
Temperature range: 200~600℉ or 100~315℃
E-juice Capacity: 3.5ml
Colors: black, silver
Joyetech eVic AIO Kit comes with
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Variable temperature control
Real time clock display
Detachable structure and replaceable battery & glass tube
Top airflow control brings large air inlet
Upgradeable firmware with changeable LED lights
All-in-one device with separate atomizer adapter
Dual Circuit Protection And Reverse Polarity Protection
Multiple Atomizer Heads Can Be Applied
Press the fire button 5 times in quick succession to turn the device on.
In the same way, the device will be powered off after 5 presses.
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Charging: Simply charge eVic AIO by connecting it with a computer or a wall adapter via USB cable. When it is fully charged, the display will go out.
Change the led color: When the device is on, hold the fire button and right regulatory button simultaneously to enter into LED Color interface.
Set screen protection time: When the device is on, hold the fire button and right regulatory button (on the bottom) simultaneously to enter into adjustment interface. Press the right regulatory button again to enter into screen protection time setting.
Shift between TEMP/POWER/Bypass/TCR Modes:
Press the fire button for three times to enter into the setting menu. Press the right regulatory button to shift between different Modes when the battery is on.
(1)under POWER or BYPASS mode, press the left regulatory button to enter into subsidiary menu.
(2)under TEMP or TCR mode, press the left regulatory button to enter into subsidiary menu: VT, PWR, COIL and AMP. Coil temperature can be adjusted with regulatory button.Under VT mode, maximum initial wattage can be adjusted. Press the fire button 3 times to enter the menu. Wattage can be adjusted with regulatory button.
Atomizer Head Replacement: unscrewing the top cap, the atomizer head is located on the cap. Screw and replace it.
E-juice refilling:E-juice filling can be easily achieved by removing the top cap and injecting through the side holes (not the vent pipe) directly.
Air inflow Control: By rotating the airflow control ring to adjust the airflow.
Apply the Atomizer Adapter
Unscrew the airflow ring and remove the whole part. Screw the atomizer adapter tightly with a coin, then you're able to apply multiple types of atomizers with the 510 pin.
3 months for battery. Pls check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Our images are copyrighted. It is forbidden to reprint without our permission.
eVic AIO vs eGrip II, 8 differences by HG
No Customer Review
Questions and answers about this item.Ask a Question
What is the recommend battery? I keep getting a weak battery notification using ultra fire tr 18650 5000mAh 3.7V. HELP!!!16-09-13 07:44
Hi, we suggest you use constant output current no less than 25A battery, for example, Sony VTC5/VTC3/VTC4. http://www.heavengifts.com/18650-Battery.html16-09-13 11:07
Hello guys, do you know will you sell the glass as a spare part, or do you have the spec so we can get it otherwise? Thanks! Cheers!16-09-07 06:00
Hi, the spec is 18mm (D) x 33.5mm (H). We won't order it for the moment.16-09-07 13:17