Heatvape Kayfun Mini V2.1 Rebuildable Atomizer Kit is one of hottest selling atomizer kits on ecig market. It comes with complete DIY materials. Perfect for e-cig DIY fans. Get it to start DIY immediately!
Heatvape Kayfun Mini V2.1 RBA Rebuildable Atomizer Kit - 3ml, Steel
Heatvape Kayfun Mini V2.1 RBA Rebuildable Atomizer Kit by Heatvape is one of hottest selling atomizer kits on current ecig market. It comes with complete DIY materials including heat coils, special screwdriver, e-liquid bottle and several spare parts for your DIY needs.
Size (length x diameter): 85mmx14mm
Capacity: 3ml(with the short chamber)/6ml(with the long chamber)
Coil: dual coil or single coil (you should build the coil)
Material: stainless steel
Material of the transparent body: Polycarbonate
Thread: 510 thread
It comes with
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
1. Dual coil or single coil
2. Constructed from soild stainless steel
3. Rebuildable Tank Atomizer
4. Integrated Drip tip and 510 Drip tip adaptor
5. Juice capacity: 3ml
6. Adjustable airflow
7. Overflow colletion cap
8. Rebuildable Tank Atomizer
9. Complete DIY materials
1)How to assemble
First, Screw the collector-tank in atomizer base.
Second, install wick/coil.
Third, screw evaporation chamber into the atomizer base, then body, cover and mouthpiece in succession.
2)How to adjust the airflow
For the function of adjustable airflow, Kayfun-mini comes with a special screwdriver to assist the operation. Using the bottom part of the screwdriver to adjust the directions of screw in the atomizer head ring, you can easily realize different draws.
Note: The kit comes with a spare screw for the airflow valve. Pls keep them in position.
3) How to fill in e-liquid
Kayfun-mini filling can be done in two ways.
Method 1 (classic):
-Unscrew the mouthpiece and the top cap
-Fill in e-liquid along with the inner wall of the atomizer tube (not through the central hole) Do not fill to the top
-Screw the cap and mouthpiece back
Method 2 (through the valve)
Filling through the valve, you will need a bottle with a thin plastic nose. Nose diameter should be suitable to the filling port.
- Turn the mouthpiece down
- Insert the nose of the bottle in the valve opening.
- Fill the tank by squeezing the bottle. The air will escape from the tank into evaporation chamber through the same grooves.
- Take out the nose of the bottle from the valve, turn mouthpiece on.
4) How to get 6ml capacity
-Replace the short chamber with the long one
-Assemble the plastic tube to the atomizer base and then connect with the steel tube
-Assemble the rest parts and you can get a 6ml capacity atomizer. Done!
Great, little atomizer.
Easy to make coil ( as normal Kayfun)
Made and work very well.
Questions and answers about this item.Ask a Question