Joyetech eGo One CT Battery - 2200mAh, the same battery as that in eGo one CT Kit -2200mAh. It features with constant Temp technology, which presents you CT-Ti/ CT-Ni/ CW mode in 5 fashionable colors.
Notice: Joyetech now requires S/N (serial number) before providing replacements (due to counterfeits in market).
We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
Shipping restriction: due to exclusive distributor of Joyetech, we do not send Joyetech products to customers in Russia, South Korea or UK.
Joyetech eGo One CT Battery - 2200mAh
Joyetech eGo One CT Battery - 2200mAh, it features with constant Temp technology, which presents you CT-Ti/ CT-Ni/ CW mode in 5 fashionable colors. The battery can work with eGo one series atomizers and atomizer heads. It will bring you the best vaping experience.
Size (length x diameter): 89 x 19mm
Resistance range: 0.2ohm - 1.0ohm for CT mode
0.4ohm - 3.5ohm for CW mode
It Comes with
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
CT-Ni, CT-Ti/CW Mode Applied
Tiny Shape with Easy Operation
Varied Levels of Watts and Temps
Many Color Options
Power on and off: press
the button for 5 times in quick succession, the button light will flash
5 times to indicate eGo ONE CT is ready for use. In the same way, eGo
ONE CT will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE CT by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
Shift Between CT-Ni/CT-Ti/CW Modes: when the device is off, long press the fire button, you can shift between CT-Ni/CT-Ti/CW modes within 2 seconds. And release the fire button to preserve the current mode.
Note: only use temp control coils under CT mode. Damages will be caused when temp control coils are accidentally used under CW mode.
Adjustment of levels: when it's powered on, press the fire button three times to shift among Low/Medium/High levels of Wattage (under CW mode)/temperature (or CT mode) to your preference.
Output Levels for eGo One CT (CW mode)
Temp Levels for eGo One CT (CT Mode)
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity Light condition
60% - 100% Stay lit
30% - 59% Slowly flashes
10% - 29% Moderately flashes
0 - 9% Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
DOA (Dead on Arrival) ONLY!
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
No Customer Review
Questions and answers about this item.Ask a Question