Joye eVic VTC Dual features replaceable back cover for alternatively using one or two cells to reach to 75W and 150W respectively. ULTIMO, which adopts new top filling system and improved adjustable airflow control, fits eVic VTC Dual MOD perfectly.
Joyetech now requires S/N (serial number) before providing replacements (due to counterfeits in market).
We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
Shipping Restriction: Due to exclusive distributor of Joyetech, we do not send Joyetech products to customers in Russia, South Korea or UK.
Joyetech eVic VTC Dual with ULTIMO Starter Kit W/O Battery
Joyetech eVic VTC Dual with ULTIMO Atomizer features the replaceable back cover for alternatively using one or two cells as you prefer where maximum output can be reached to 75W and 150W respectively. New top filling system and improved adjustable airflow control are adopted in the ULTIMO atomizer. MG series heads with novel designs especially provide great vaping experience, including which the innovative MG Ceramic-0.5ohm head with long-lasting lifespan brings you a pure flavor ever.
eVic VTC Dual MOD
Size: 23 x 38 x 86mm (with one cell)
23 x 55.5 x 86mm (with two cells)
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-75W(one cell) /150W(two cells)
Temperature Range: 100-315°C(200-600°F)
Resistance Range: 0.05-1.5ohm for VT/TCR mode;0.1-3.5ohm for VW/BYPASS mode
Battery cell: 1 or 2 18650 batteries (with rated discharge current no less than 25A)
Colors: Black, White, Burgundy, Blue, Orange
Ultimo AtomizerCapacity: 4ml
It comes with
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Replaceable Battery Cover For Alternatively One Or Two Cells
Applied with exquisite 510 Thread (with spring connector)
How to assemble:
1. Screw the top cap onto the vent pipe component and put the mouthpiece onto the top.
2. Drip a few drops into the MG atomizer head and install it into the atomizer base.
3. Screw the atomizer base into the glass tube then the whole ULTIMO is assembled.
Atomizer head replacement:
Unscrew the atomizer base, the MG atomizer head is located right in it. Just unscrew it and replace a new one, and clean.
1. Please do not wash the MG atomizer head with water. Simply scrub it with cotton or clean dry cloth.
2. Please drip a few drops of e-juice into the atomizer head and inhale a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.
Unscrew the top cap from vent pipe component and inject the liquid directly into e-juice holes on both sides.
1. Please don't fill in through the middle hole of the atomizer cap.
2. Please don't overfill to avoid overflown.
Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.
Charging & Upgrading: Please use high-rate 18650 cells with continuous rated discharge current no less than 25A. We suggest you take out the cells and charge them with a stand alone charger. The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade you device.
Stealth function: When the device is on, simultaneously hold the fire button and left regulatory button. This will switch between stealth on and stealth off function. In stealth on mode, you can still vape with the screen off.
Key lock function: When the device is on, simultaneously press the two regulatory buttons. This will switch between adjustment lock and adjustment unlock function. While key lock is on, the regulatory button will not work to prevent accidental adjustments.
Switch the display mode: Press the press the two regulatory buttons simultaneously in power off state, the display will rotate 180 degrees.
Set screen protection time: When the device is on, simultaneously hold the fire button and the right regulatory button to enter into adjustment interface. Choose the time and press the fire button to confirm.
How to set the time: Press the fire button 3 times to enter into the setting menu. Press the left regulatory button to switch between hour, minute, year, month and day. Press the right regulatory button to adjust the parameter.
Switch among different modes: Press the fire button 3 times to enter into the setting menu. Press the right regulatory button to switch among TEMP/ TCR/ POWER and BYPASS modes. Press the fire button to confirm.
3 months of eVic VTC Dual MOD. Please check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Our images are copyrighted. It is forbidden to reprint without our permission.
No Customer Review
Questions and answers about this item.Ask a Question