The VapeOnly vCat Starter Kit comes with a brand new design. In this starter kit, two different colors e-cigarettes are available. Get it with the best price to enjoy the optimum vaping experience.
Video Reviews by Dan Vapeman Badgley
The VapeOnly vCat Starter Kit -1100mAh comes with a brand new design and each kit comes with two different colors e-cigarettes. vCat cartomizer, assembled with a water-drop shape removable mouthpiece, has a Pyrex glass tube with metal cover outside. Dedicated 1100mAh battery in it ensures you stable and optimum performance.
Size of battery (Length x Diameter): 109 x 14.0mm
Size of cartomizer (Length x Diameter): 67.6 x 14.0mm
Working voltage: 3.3V-4.2V
Maximum current: 3.5A
Battery capacity: 1100mAh
Coil resistance: 1.8ohm Atomizer
Materials: stainless steel, copper hardware, glass, rubber seal components
The kit comes with
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. Transparent “cat’s eye” window design
2. Pyrex glass cartomizer with metal cover protection
3. Patented button with power level indicator
4. Full voltage output
5. Short circuit protection
6. Battery protection
7. VapeOnly vAir D16 Replaceable BVC Coil Unit
Power on/off: vCat battery can be powered on or off by 5 quick clicks on the button.
How to refill the cartomizer
- Hold the connector base and screw off the cartomizer form the battery. - Turn upside down the cartomizer.
- Screw off the connector base and fill in no more than 1.5ml e-liquid.
- Carefully screw on the base connector (coil unit loaded) and clear surplus liquid.
- Wait 1-2 minutes for the e-liquid to feed into the coil before you start vaping. Or Give the cartomizer a quick shake to make it faster.
- Screw onto your battery and start vaping.
How to change replacement coil
- Turn upside down the atomizer and screw off the bottom base
- Disconnect the old coil unit from the bottom base, replace with a new one.
- Screw the base back to the tube tightly.
Usage of vCat 1100mAh Manual Battery
- The vCat 1100mAh Manual Battery fits both eGo and 510 threaded cartomizers.
- Five-click lock: Five quick clicks of the button will activate the battery. Another five clicks will inactivate it. LED blinks after when it’s activated or locked.
- Patented button with power level indicator: >3.9V, green LED indicator;3.6V-3.9V, blue LED indicator; <3.6V, red LED indicator.
Simply connect the battery to a standard USB output port through the USB charger to charge the battery. LED light will blink 5 times to
indicate it starts charging. While charging, it shows green LED if battery voltage is above 4.15V, and shows red if below 4.15V. It takes
about 2.5 hours for a full charge.
Please check Guarantee Policy
Guarantee period: 6 months for batteries, no warranty for the rest spare parts.
No Customer Review
Questions and answers about this item.Ask a Question