20W VapeOnly vAres VV/VW Mod Battery
vAres is an easy-to-use and powerful 20W e-cigaratte with a rugged appearance. With a single multi-functional button and a built-in OLED screen, it is easy to operate vAres!
Battery size (length x diameter): 126 x18mm
Working wattage range: 5.0W - 20.0W
Working voltage range: 3.5V - 7.0V
Colors: Silver and Light Gun
It comes with
- 1 x 20W VapeOnly VAres VV/VW Mod Battery - 1600mAh
- 1 x Decorative Ring
- 1 x USB cable
- 1 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- Variable voltage and wattage
- 360° adjustable button
- Perfectly embedded OLED display
- 1600mAh large capacity
- 20W max current
Multi-functional button: The button can be pressed and twisted. You can press it to turn on/off, to switch mode and vape. And you can rotate the button to adjust voltage and wattage, which makes the operation much more comfortable and convenient.
Power on and off: Press the button for 5 times in quick succession, the battery will be on for using and OLED screen is enabled. In the same way, vAres will be powered off after 5 presses.
VV mode (3.5V - 7.0V): In this mode, voltage output can be adjusted by rotating the button clockwise or counterclockwise, 0.1V/increment.
VW mode (2W - 30W): In this mode, wattage output can be adjusted by rotating the button clockwise or counterclockwise, 0.5W/increment. For resistance range of 2.5-5.0Ω, the max wattage will be smaller than 20W.
Ohm Meter Function: The device will detect and show the resistance of the loaded atomizer when the button is pressed in power-on status.
Micro USB charging port (USB Passthrough Function): With the Micro-USB cable connected to a standard USB output port, it can work as a USB pass-through device for simultaneous vaping and charging.
Charging: Connect the battery through a Micro-USB cable to a USB output port to charge it. Once the vAres is connected for charging, the button LED blinks red 3 times and the OLED screen being activated. The battery icon animation on the OLED screen shows the charging status. Full-frame battery icon indicates the battery is fully charged.
10s cutoff time: When you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will show "Over 10s Protection".
Atomizer Resistance Detection: When the atomizer resistance is lower than 0.5ohm, the OLED screen will display "Atomizer Low".
Low-voltage protection: When the voltage is below 3.3v, the battery will be locked and refuse to be restarted.
Short-circuit protection: In the event of a short circuit(including short circuit while working and charging), the button LED will flash 8 times and the device will enter protection mode.
- It's only a battery kit, doesn't come with cartomizers/tanks.
- There is CE mark on the battery.
Please check Guarantee Policy
Guarantee period: 3 months for batteries, no warranty for the rest spare parts.