Vision Vapros iBox 25W VW MOD 1500mAh
25W Vision Vapros iBox VV/VW Multi-functional MOD - 1500mAh, an innovative mod with new functions like external output to charge your phones, minimum resistance value and cut-off time setting etc.
This product will not be restocked anymore. We have prepared many other amazing products for you to choose on our website.
You may mix the following items to get bulk discount.
USD 65.00 USD 97.50
USD 41.99 USD 62.99
USD 10.30 USD 15.90
USD 55.00 USD 78.00
USD 42.50 USD 63.75
USD 65.00 USD 98.00
USD 118.00 USD 177.00
USD 49.90 USD 75.00
USD 59.99 USD 89.99
USD 49.00 USD 74.00
25W Vision Vapros iBox - 1500mAh
25W Vision Vapros iBox VV/VW Multi-functional MOD - 1500mAh is an innovative mod with multi-functions like external output to charge your phones, the minimum resistance value setting, cut-off time setting, time setting, besides the common VV and VW and resistance value detection etc.
Size (length and width): 94.5 * 54mm
Voltage: 3V - 6V
Wattage: 3W - 25W
Built-in battery: 1500mAh
It comes with
- 1 xVapros iBox MOD
- 1 x Micro USB cable
- 1 x 220V ac adapter
- 1 X User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. Date and time adjustment
2. External output control
3. Resistance protection control
4. Cut-off time control
5. Three controlling mechanisms
6. VV/VW two modes
Turn on/off: when the iBox is off, pressing the round center button for 2 seconds will enable it. After it's turned on, also press the center button for 2 seconds, it will enter the management console, which shows 6 icons. You can chooseeach icon by rotating the center button;To turn it off, choose the first sub-menu and click the enter button once.
VV/VW mode exchange: these two modes can be easily changed by clicking the center button once.
Time management:use the rotating wheel to choose the second icon and click the center button to enter.Then you can reset time through the rotating wheel and click enter button to get to next section.
External output control: use the rotating wheel to choose the third icon and click the center button to enter. Once clicked, it goes back to the main interface with a lighting sign on the main interface. To be deactivated, repeat the same procedure.
Resistance protection control:use the rotating wheel to choose the fourth icon and click the center button to enter. The range of adjustment is between 0.5ohm to 1.8ohm. Once set, with any carto having lower ohm value than the setted value, the device will report "RESISTANCE PROTECTION" on main screen and stop the power button to work.
Cut-off time control:use the rotating wheel to choose the fifth icon and click the center button to enter.The range of adjustment if between 8 - 18 seconds. Once set, at the configured length of power output (as indicated by the running clock when push the sliding button at side), the device will cut off power output for safety purpose.
Exit:use the rotating wheel to choose the sixth icon and click the center button to enter.It exits the management console and goes back to the main interface.
Charging the device: charge can be done by only use the USB cable, or with both the USB cable and the AC adapter.
- There is CE, ROHS symbol on the body.
- 510 thread, compatible with 510 threaded cartomizers.
Please checkGuarantee Policy.
Guarantee period: 6 months for batteries.
Share your thoughts with other customersWrite a Review
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?