30W Eleaf iStick Full Kit


Product Introduction

30W Eleaf iStick or iStick box MOD is an newly launched battery with a fashionable metallic appearance. With a compact size, you can hold that in the palm, much more convenient for usage and portability. Four bright colors with powerful functions. The highlight is the incremental OLED screen.


Parameters

Size (length x width x height): 32 x 20 x 77 mm

Color: black, silver, red and blue
Capacity: 2200mAh
Thread Type: 510 Thread
Variable voltage: 2.0V - 8V
Variable wattage: 5W - 30W

Minimum resistance value: 0.4ohm

30W Eleaf iStick Mod Battery Top

30W iStick full kit comes with

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.


Features
1. OLED screen
2. 2200mAh large capacity
3. 30W strong output wattage

4. Adjustable voltage

5. Spring connector

6. Pass-through function

Spring connector

6. High Stability: The output wattage is in high stability. It can also be up to the high output wattage even in the case of low power.

30W Eleaf iStick Mod Batteryn Features



Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on. In VV mode, you can adjust output voltage between 2.0V-8.0V. In VW mode, you can adjust output wattage between 5W-30W.
VV VW
Adjust the voltage/wattage: Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.
Lock and Unlock: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.
Lock and Unlock
Switch the display mode: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.
How to charge: iStick 30W is charged through USB port at the bottom of battery. It will take 2.5 hours to fully charge the battery via 1A wall adaptor.
The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and keep shining for 15 seconds then go out.

charge


  • It comes with extra an 510-eGo thread, can work with ego/510 threaded clearomizers/tanks.
  • No cartomizer/tank comes with.
  • There is CE mark on battery end.



3 months. Pls check Guarantee Policy.

Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.