30W Joyetech eGrip OLED CL VW Kit -1500mAh
30W Joyetech eGrip OLED CL VW MOD, is the upgraded eGrip OLED. With all the features of eGrip OLED, it has the CL atomizer base and CL atomizer head.
Size: 46.4mm X 20.4mm X 99.5mm(including mouthpiece)
Output mode: VV (2.0V to 8.0V) /VW (5W to 30W) Mode
-Please press the fire button 30 times after turn it off. Then the max output will be 30W.
E-juice Capacity: 3.6ml
6 Colors: black, cherry red, sky blue, silver, pearl white, magic blue
Joyetech eGrip OLED kit comes with
- 1× eGrip Mouthpiece
- 1× eGrip OLED CL MOD
- 2× eGrip CL Atomizer Head
- 1× eGrip CL Atomizer Base
- 1× 1A Wall Adaptor
- 1× USB Cable
- 1× Manual & Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- eGrip OLED CL Kit doesn't come with e-liquids. You shall purchase e-liquids separately.
- There is CE mark on battery end.
- You can use eGo one atomizer head for this device. 1.0 ohm is recommended. (Attention: It couldn't use eGo one CLR head.)
1. Power: 30W wattage regulation (from 5W to 30W), and 2.0V to 8.0V adjustable
2. Transparent window, convenient filling
3. Air inlet regulation
4. Incomparable design: integration of atomizer and battery
5. All-metal surface, compact, exquisite and portable
6. Replaceable eGrip CL Atomizer Head (eGo one atomizer head in 1.0ohm)
Output wattage adjustment
In this VW mode, wattage output can be adjusted by rotating the regulation ring clockwise or counterclockwise. With the wattage increasing, the vapor speed will be faster and you can enjoy a huger vapor.
Note: To adjust the max output to 30W, please press the fire button 30 times in succession after turn it off.
Air inlet regulation
Spin the adjustable screw on the side of the bottom. Contrarotate the screw will loosen the screw. The looser the screw is, the bigger the air inlet is.
Push up the lid on the side of eGrip body, then slowly refill the liquids into the hole. And do remember to lock the cap after finishing filling.
Atomizer Head replacement
Unscrew the big screw at the bottom with a coin, and the atomizer head is located on the base of it. Simply unscrew the atomizer head and replace a new one.
Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adapter or other power source such as a computer. (it can be used whilst on charge)
DOA (Dead on Arrival) ONLY!
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Our images are copyrighted. It is forbidden to reprint without our permission.