iStick Power Nano with MELO 3 Nano atomizer is a perfectly combined e-cigarette kit in a compact package. Tiny yet efficient, it delivers a satisfying amount of vapor at 40w maximum output and comes with various output modes for different vaping experiences. The MELO 3 Nano can easily be refilled with e-liquid by removing the top cap only. With the new ECML 0.75ohm Head, this optimal match will give you a great vaping experience with nice flavor especially for mouth to lung inhaling.
iStick Power Nano battery
Size: 38mm x 23mm x 55mm
Output Mode: VW/Bypass/Smart/TC(Ni,Ti,SS, TCR-M1, M2, M3)
Output Wattage: 1 - 40W
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW/Bypass/Smart mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
Color: brushed silver, white, grey, bronze, wood grain
Melo 3 Nano atomizer
E-liquid capacity: 2mL
Eleaf iStick Power Nano Kit comes with
- 1 x iStick Power Nano battery
- 1 x Melo 3 Nano atomizer
- 1 x ECML 0.75ohm head
- 1 x EC 0.3ohm head
- 1 x Seal ring
- 1 x USB Cable
- 2 x User Manuals
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Tiny appearance and compact size yet still intelligent
New ECML 0.75ohm for mouth to lung inhaling
Various modes with output power of 40W
Dual circuit protection
510 spring connector
Top e-liquid filling
Hidden airflow control
Atomizer with detachable structure for easy cleaning
How to use the Melo 3 Nano?
1. Drip a few drops of e-juice directly into the coil to make it fully saturated before first use.
2. Screw the atomizer head onto the atomizer base tightly, and put the glass tube on the atomizer base.
3. Screw off the top cap from the atomizer, slowly fill e-juice into the atomizer along the glass tube and screw the top cap with mouthpiece on tightly after filling. (Note: please don't overfill. please take several puffs without activating the atomizer and leave the atomizer sit for several minutes before use. )
4. The airflow can be adjusted by rotating the airflow control ring on the atomizer base.
5. Finally the Melo 3 nano atomizer is ready to use.
Power on/ off: Press fire button 5 times continuously to turn on/off the device.
Stealth on/ off: Press the fire button and down button simultaneously when the device is powered on to switch between stealth on and off mode.
Adjustment buttons lock/ unlock: Keep pressing up button and down button simultaneously for 2 seconds when the device is powered on, then the up and down buttons will be locked and the screen will display "locked". In the same way, you can repeat it to unlock the display.
Switch display mode: Keep pressing up and down button simultaneously for 2 seconds when the device is powered off, the screen display will rotate 180 degrees.
Switch between vaping modes: Long press the mode button to switch among VW, BYPASS, Smart, TC-Ni/Ti/SS, TCR-M1/M2/M3 modes.
Charging: the iStick Power Nano can be charged through USB port at the bottom of the device via 1A wall adapter or a computer.
Protections: Atomizer protection, Short circuit & no atomizer protection, Low voltage protection, High temperature protection
- You still need order e-juice e-liquids to use it.
3 months for iStick Power Nano battery. Pls check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Our images are copyrighted. It is forbidden to reprint without our permission.