KangerTech New Clear Cartomizer - T3D Clearomizer.
- New Dual Coil
- Huge Vapor
- No burning taste
- No leaking
- Removable Mouthpiece
Russia wholesalers/dropshippers: So sorry, please order KangerTech T3D cartomizer after April 18, 2014.
- 1.5ohm coil unit installed. Dual Coil unit is at 5pc KangerTech Dual Coil Unit for Protank 3 / AeroTank / EVOD 2 /T3'D Clearomizer.
- eGo thread, it compatible with eGo/eGo-T/eGo-C/eGo-C Twist battery and eVic.
- It's a empty cartomizer, you still need order heavengifts e-liquids.
- It has a "KangerTech T3'D" logo on the base connector.
| 5pc 2.2ml KangerTech T3'D Dual Bottom Changeable Coil clear Cartomizer|| 5pc |
|Resistance||1.5 +/- 0.2ohm|
| Length|| 7.5cm|
| Diameter|| 1.5mm|
It contains four parts:Stainless Mouthpiece,Container body,Dual coil unit and base connector.
How to refill the cartomizer?
1. Turn upside down the cartomizer body and fill in no more than 2.2ml e-liquid.
2. Carefully screw on the base connector(coil unit loaded) and clear surplus liquid.
3. Allow 1-2 minutes for the E-Juice to feed into the coil before you start to vaping. Or Give the cartomizer a quick shake to make it faster.
4. Screw onto your battery and start vaping.
How to replace the coil unit/coil head?
Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!
How to remove your BCC cartomizer from battery?
Hold the bottom of the clear cartomizer when you separate it from battery MOD. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.
- Make sure the cartomizer should be screwed back tightly onto the Joye eGo/eGo-T/eGo-C/eGo-C Twist battery.
- Be sure that the coil unit is screwed into the cartomizer tightly. If you get few vapor when you use, try to make the clear cartomizer upside down to let the fibre wick and coil get e-liquid, which are on the top of the cartomizer.
- When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!
|Simple packing. Customary Packing from the factory,the packing is subject to change without notice.|