Kangertech EVOD 2 BDCC Cartomizer 1.6ml 5pcs
KangerTech EVOD 2 Dual Bottom Changeable Coil Cartomizer is the new eGo EVOD BCC Clearomizer, 5pc Dual Coil unit, eGo battery thread, Tube with a metal cover with 2 windows, 1.5ohm coil unit, 7 colors.
- 100% Quality Guarantee
- 24 hours delivery
- 7 Days Money Back Guarantee
You may mix the following items to get bulk discount.
USD 6.90 USD 10.00
USD 17.50 USD 26.25
USD 15.50 USD 19.38
USD 15.90 USD 23.85
USD 23.90 USD 29.88
USD 23.90 USD 29.88
USD 12.90 USD 16.13
USD 23.00 USD 28.80
USD 19.80 USD 24.75
USD 31.50 USD 39.40
Shipping Restriction: Due to exclusive distributor of Kangertech, we could not send Kanger products to customers in Denmark and Ukraine. You can check more exclusive distributors .
KangerTech New Clear Cartomizer - EVOD 2 Clearomizer.
- New Dual Coil
- Huge Vapor
- No burning taste
- No leaking
- Removable Mouthpiece
- Dual Coil unit is at 5pc KangerTech Dual Coil Unit for Protank 3 / AeroTank / EVOD 2 Clearomizer.
- eGo thread. It compatible with eGo/eGo-T/eGo-C/eGo-C Twist battery and eVic.
- Tube with a metal cover with 2 windows.
- 1.5ohm coil unit.
- It's a empty cartomizer, you still need order heavengifts e-liquids.
- It has a "KangerTech EVOD 2" logo on the base connector.
| 5pc 1.6ml KangerTech EVOD 2 Dual Bottom Changeable Coil Cartomizer ||5pc |
|Resistance||1.5 +/- 0.2ohm|
| Length|| 70.5mm|
| Diameter|| 14.6mm|
It contains four parts:Stainless Mouthpiece,Container body,Dual coil unit and base connector.
- Make sure the cartomizer should be screwed back tightly onto the Joye eGo/eGo-T/eGo-C/eGo-C Twist battery.
sure that the coil unit is screwed into the cartomizer tightly. If you
get few vapor when you use, try to make the clear cartomizer upside down
to let the fibre wick and coil get e-liquid, which are on the top of
- When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!
How to refill the cartomizer:
1. Turn upside down the cartomizer body and fill in no more than 1.6ml e-liquid.
2. Carefully screw on the base connector(coil unit loaded) and clear surplus liquid.
3. Allow 1-2 minutes for the E-Juice to feed into the coil before you start to vaping. Or Give the cartomizer a quick shake to make it faster.
4. Screw onto your battery and start vaping.
How to remove your BCC cartomizer from battery?
Hold the bottom of the clear cartomizer when you separate it from battery MOD. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.
|Simple packing. Customary Packing from the factory,the packing is subject to change without notice.|
Share your thoughts with other customersWrite a Review
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?