Aspire Cleito RTA System


Product introduction

Aspire Cleito RTA System is an easy-to-build RTA system which has a dual coil velocity-style deck. It has tempestuous airflow and creates intense vapor cloud production. The Cleito RTA will lift your favorite E-juice's flavor to the next level.


It comes with

  • 1 x Cleito RTA
  • 2 x Pre-installed Clapton coils (0.35-0.45ohm; 40-50w)
  • 8 x Extra Grub Screws
  • 1 x Allen Wrench
  • 5 x Extra O-ring Sets
  • 1 x Baggy of Cotton

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Aspire Cleito RTA System

Aspire Cleito RTA System


1. Easy to build
2. Dual coil two-post deck
3. Tempestuous airflow
4. Intense vapor cloud production
5. Great flavor
6. Large enough for clapton coils

Aspire Cleito RTA System


How to install coils:
1. Remove the four grub screws.
2. Install the coil diagonally into the velocity deck posts.
3. Screw grub screws down with Allen wrench. Snip off the coil leads.
4. Install second coil diagonally then tighten it down. Cut off leads.
5. Press the coil ring together with pliers until coil rings are evenly spaced.


How to wick the coils:
1. Push cotton through the coils.
2. Take some scissors and cut cotton off where it touches the bottom of the deck.
3. Take some tweezers and push it down into the e-liquid deck corners.
4. Install the RTA into your Cleito tank.
5. Fill e-Juice into the tank and let it sit for 4 minutes.
6. Screw on the Cleito top hardware on and begin vaping.

Aspire Cleito RTA System


Our images are copyrighted. It is forbidden to reprint without our permission.

Aspire Cleito RTA System