Ehpro eTank S2 Subohm Tank - 5ml, black
Ehpro eTank S2 Subohm Tank - 5ml, black is a new flavor chasing system. It features a user-friendly top filling, oil feeding controlled by adjustable air-holes, and 5ml capacity. It can be used with a wattage of 5W to 50W.
Size (length * diameter): 54mm x 22mm
Materials: stainless steel, pyrex glass
Colors: silver, black
EHPRO eTank S2 comes with
- 1 x eTank S2 tank (0.2ohm MSVC coil pre-installed), black
- 1 x 0.5ohm MSVC coil
- several o-rings
- 1 x User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Innovative Top Filling Design
Cooper positive pin with better conductive properties
Smaller pre-made coil head
How to assemble the tank: insert the MSVC coil head into the base, then screw the AFC (air flow control) section onto the base, the first part assembly is finished; then install the glass tube and top cap; lastly, put on the drip tip.
How to change coil heads: hold the base in your hand, then rotate the chimney counterclockwise; unscrew the base counterclockwise, then pull out the coil head; replace with a new coil head and tighten the base. It's done.
How to add e-juice: rotate the AFC ring counterclockwise until the valve can go no further; unscrew the top cap. fill the tank via the inlet up to the visible indicator - the groove (the AFC ring needs to remain sealed during this process). After filling, thread the top cap back on clock-wise. Please make sure it isn't overfilled. You will have overfilled the tank if liquid filled reaches higher than the groove.
Note: it will be prudent to wait 5 minutes before vaping, to let the cotton get fully saturated.
- It comes with 510 thread, can work with most 510 threaded batteries.