World NO.1 E-CIG B2B Supplier Since 2007!

Eleaf Lemo 3 Atomizer With RTA Base 4ml
Mouse over to zoom in
M1

Eleaf Lemo 3 Atomizer With RTA Base 4ml

TPD Compliance

Lemo 3 is the first atomizer that can either be used with replaceable atomizer head or used with pre-made or self-built coil as RTA for DIY fun. Top filling & bottom airflow, you will have a great vaping experience. Type A and Type B for your selection.

USD 38.00
List Price USD 46.00 | Discount: 17% off| Earn 38 points
Bulk Price:
Packing:
100pcs/carton
Color:
  • Silver
Type:
  • Type A
  • Type B
SKU:

Pre-order item. What's Pre-order ?

Weight:
Quantity:
In stock
Add to wishlist List Mode
Guaranteed:
  • 100% Quality Guarantee
  • 24 hours delivery
  • 7 Days Money Back Guarantee

Attention:
1. Shipping restriction: Due to exclusive distributor of Eleaf, we do not send Eleaf products to customers in South Korea or UK. You can check more exclusive distributors .
2. Notice: Eleaf now requires S/N (serial number) before providing replacements (due to counterfeits in market). We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!

Eleaf Lemo 3 Atomizer With RTA Base - 4ml

Product Introduction
Eleaf Lemo 3 Atomizer With RTA Base, an innovatively designed atomizer, is the first one that can either be used with replaceable atomizer head or used with pre-made or self-built coil as RTA for DIY fun. The e-liquid can easily be refilled from the top by removing the top cap. Also all parts of Lemo 3 can be detached and reassembled, allowing convenience in cleaning and maintenance.


Parameters
Size: 22mm(D) x 62mm(L)
Material: 304 SS + Pyrex glass
Capacity: 4ml
Thread: 510
Color: Silver

 

 

Lemo 3 (Type A) comes with

  • 1 x Lemo 3 Atomizer with RTA base
  • 2 x 0.85ohm clapton coils
  • 1 x Atomizer head base
  • 1 x EC 0.3ohm head
  • 1 x EC NC 0.25ohm head
  • 1 x Glass tube
  • 1 x Pure cotton
  • 1 x Small tool (Tweezers)
  • 1 x Screwdriver
  • 6 x Screws
  • 1 x Silicone ring
  • 3 x O-rings
  • 1 x User Manual

Lemo 3 (Type B) comes with

  • 1 x Lemo 3 Atomizer with RTA base
  • 2 x 0.85ohm clapton coils
  • 1 x Glass tube
  • 1 x Pure cotton
  • 1 x Small tool (Tweezers)
  • 1 x Screwdriver
  • 6 x Screws
  • 1 x Silicone ring
  • 3 x O-rings
  • 1 x User Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

 

Eleaf Lemo 3

 

 

304 stainless steel
Innovative Interior Design: can both be used with replaceable atomizer head and used with pre-made or self-built coil as RTA for DIY fun.
New Clapton Coil: When using the new pre-made clapton coils, you will get satisfying vapor production with nice flavor.
Top E-liquid Filling: The e-liquid can easily be refilled from the top by removing the top cap only.

 

Smooth Airflow: The unique structure of RTA base allows a smooth and steady airflow, bringing better vaping flavor.

 

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

Detached and reassembled structure
Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

 

 

How to use?
A: When used with pre-made or self-built coil as RTA
1. Screw off the atomizer base, loose the 2 screws on the RTA cap and take the RTA cap off.
2. Fix the pre-made or self-built coil on the RTA base, activate the coil with your device till it goes red, and then put the cotton through the coil after the coil cools down.
(Note: please make sure the finally fixed coil does not come into contact with the surface of the deck and inner wall of the RTA cap.)
3. Drip a few drops of e-liquid directly into the pre-made or self-built coil to make it fully saturated before use, put the RTA cap on and tighten the screws, and then screw the atomizer tube onto the atomizer base tightly.

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver
4. Screw off the top cap from the atomizer, slowly fill e-juice into the atomizer along the glass tube and screw the top cap on tightly after filling.
(Note: please don't overfill and don't fill e-liquid into the air pipe; please take several puffs without activating the atomizer and leave it sit for several minutes before use.)
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base.
6. Finally the Lemo 3 as RTA is ready for use.
Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

B. When use with atomizer head as ordinary atomizer
1. Take off the RTA base from the atomizer base, and fix the atomizer head base on with screws tightened.
2. Drip a few drops of e-juice directly into the atomizer head to make it fully saturated before use, screw the atomizer head onto the atomizer head base tightly, and screw the atomizer tube on.

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver


3. Screw off the top cap from the atomizer, slowly fill e-juice into the atomizer along the glass tube and screw the top cap on tightly after filling.
(Note: please don't overfill and don't fill e-liquid into the air pipe; please take several puffs without activating the atomizer and leave it sit for several minutes before use.)
4. The airflow can be adjusted by rotating the airflow control ring on the atomizer base.
5. Finally Lemo 3 atomizer is ready for use.

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

 

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

 

Our images are copyrighted. It is forbidden to reprint without our permission.

Eleaf Lemo 3 Atomizer With RTA Base - 4ml, Silver

 

Related Products

A new item has been added to your cart. You now have 18 items in you cart.

A new item has been added to default List.
0086 15001918732