The iStick bending adaptor


Product Introduction

The iStick bending adaptor is a newly designed genius spare part for your iStick. It can save space and make the device easier to carry when attached with atomizer. The bending adapter also comes with a 510 spring pin which ensures better contact for your device.


Parameters

Material: Stainless steel

It comes with

  • 1 xEleaf iStick Bending Adaptor
  • 1 x Screw tool

Simple packing.Customary packing from the factory, the packing is subject to change without notice.


How to use

1. Press the button on the bending adaptor to open it.
2. Screw the bottom of the bending adaptor clockwise to iStick with the attached small tool.
3. Screw your atomizer onto the adaptor. Through pressing the button of the adaptor, one can easily flip the atomizer by 180 degrees.

Tips: According to our test, we suggest you attach the adaptor above the iStick first ( the bearing side towards the iStick screen); holding the adaptor and your iStick in position while screw on the adaptor with the tool by rotating the "cross-shaped"part clockwise till it's completely fixed.



  • It only works with Eleaf iStick battery to connect with 510 thread atomizers.
  • It's not suitable for 50w istick, the cartomizer won't be vertical; when using with 30w istick, there is a little angle of tilt, also the diameter can not be over 11mm.

30W istick