Heatvape Invader Multi-functional VV/VW MOD Kit W/O Battery
Product IntroductionHeatvape Invader Multi-functional VV/VW MOD comes with touch screen operation. The device can be powered up to 30W and accepts two 18650 batteries in parallel. It uses the advanced USA Microchip 8-bit PIC® Microcontrollers to ensure its stable performance and safety. It has a very nice hand feel and many useful functions such as calendar, power bank and flashlight.
Size of mod: 129.2x60.2x25.7mm
Materials: aluminum alloy and zinc alloy
Variable Voltage: 3.0V-6.0V
Variable Wattage: 3w-30w
Quiescent current: <50uA
Power bank: current 2.1A, voltage 5V
It comes with
- 1x Invader Mod
- 1x USB Cable with 4 USB ports
- 1x Decorative Ring
- 1x User Manual
Mirror plate main button
1.Touch screen operation
4. Emergency flashlight
5. Power bank
6. Low-voltage warning
7. Short circuit warning
1. Battery assembly: put 2pcs 18650 batteries in the mode and it will power on for self testing.
2. Start:press the main button 3 times to enter the menu settings mode, below items will be shown on display: power on/off, voltage mode, wattage mode, calender and exit menu mode. Press "+" to move cursor right; press "-" to move cursor left.
3. Turn on/off: move the cursor to the on/off icon and press the main button to enter boot mode until the screen shows "POWER ON". It will be powered off after you do the same operation.
5. Voltage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "V" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
6. Wattage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "W" icon and press the main button. Then it will go to the voltage mode. You can change the voltage by pressing the "+" or "-".
7. Calender: move the cursor to the calender mode icon and press the main button to enter the date and time setting. The screen will show the exact time, date, month and year. Press the main button to move the cursor and press "+" or "-" to change.
8. Exit menu: move the cursor to the exit menu icon and press the main button to exit the menu.
9. Low-voltage warning: if the voltage of the battery is lower than 6.5+/- 0.1V, the display will show "low-voltage" with no output while pressing "smoking key".
10.Short circuit warning: if short circuit happens on atomizer, the display will show "output short" and stop output.
11. LED flashlight: turn on the device, flashlight will work or stop work by holding the button "-" for 2 seconds. (On the main interface, LED flashlight can not work.)
12 Battery charging
Use micro USB charger (5v, current >800mA), the screen will show charging bar and the current capacity status. When the battery is charged full or stopped charging, the screen will turn off and switch to hibernation.
- No 18650 batteries included. You shall purchase saparately.
- 510 threaded.
- It comes with multi-ports USB cable, which can be used with your personal devices.
DOA (Dead On Arrival) ONLY!