World NO.1 E-CIG B2B Supplier Since 2007!

Heatvape Kayfun Standard 3.1 RBA Atomizer 4.5ml
Mouse over to zoom in

Heatvape Kayfun Standard 3.1 RBA Atomizer 4.5ml

Heatvape Kayfun 3.1 RBA Rebuildable Atomizer Kit is the new rebuildable atomizer from Heatvape (only recommand for experienced users). It comes with complete DIY materials. Get it to start DIY immediately!

The product is not available.

May be it was stopped supply.
You should select other product in our site. Thank you very much!

Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml



Product Introduction
Heatvape Kayfun 3.1 RBA Rebuildable Atomizer Kit is a rebuildable atomizer designed to enhance the flavor. With an optional clear polypropylene window, you can see how much is remaining. It uses a chamber to house your wick and coil, which concentrates the vapor and produces a bold flavor.The Kayfun is made of stainless steel

Parameters
Size (length x diameter): 86x22mm
Capacity: 4.5ml
Coil: dual coil or single coil (you should build the coil)
Material: stainless steel
Material of the transparent body: Polycarbonate
Connector: 510 connector


Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml


It comes with
  • 1x Kayfun 3.1 atomizer 
  • 1x repalcement plastic tube 
  • 1x pack of wick
  • 1x pack of rubber seal rings, post screws and a steel ring 
  • 1x screwdriver 
  • 1x 10ml semi-transparent empy bottle with needle tip
Simple packing. Customary packing from the factory, the packing is subject to change without notice.


Features

detachable parts


Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml


1. Assembling order
first, Screw the collector-tank in atomizer base.
second, install wick/coil.
Third, screw evaporation chamber into the atomizer base, then body,cover and mouthpiece in succession.

2. Filling e-liquid
Kayfun filling can be done in two ways.

method 1 (classic):
- unscrew the cap.
- pour e-liquid into the space between the body and vaporizing chamber.
- screw the cap back on.

first, Screw the collector-tank in atomizer base.
second, install wick/coil.
Third, screw evaporation chamber into the atomizer base, then body,cover and mouthpiece in succession.

2. Filling e-liquid
Kayfun filling can be done in two ways.

method 1 (classic):
- unscrew the cap.
- pour e-liquid into the space between the body and vaporizing chamber.
- screw the cap back on.

method 2 (through the valve):
Filling through the valve, you will need a bottle with a think plastic nose. Nose diameter should be suitable to the illing port.

- turn the mouthpiece down
- insert the nose of the bottle in the valve opening.
- fill the tank by squeezing the bottle. The air will escape from the tank into evaporation chamber through the same grooves.
- take out the nose of the bottle from the valve, turn mouthpiece on.

3. Airflow adjustment
Air inlet can be adjusted through adjustment holes with special screwdriver.

For more details, pls refer to the product introduction.


Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml



  • Rebuildables are for experts, not average or beginner vapers.
  • 510 thread, compatible with 510/ego threaded batteries. 
  • You should build coil before using. 
  • There is CE mark on package box. 
  • Steel color also available. 
Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml

Related Products

A new item has been added to your cart. You now have 18 items in you cart.

A new item has been added to default List.
0086 15001918732