Joyetech eVic Basic with CUBIS PRO Mini Kit - 1500mAh
Joye eVic Basic kit has the upgradeable firmware with maximum output updating to 60W. It especially comes with the new colorful wrinkle paintings which has a remarkably deep rich texture. The E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative CUBIS Pro Mini with leak resistant cup design allows you to enjoy the best vaping experience ever. 10 colors for your selection.
CUBIS PRO Mini
Coil: BF SS316-0.5ohm, LVC clapton-1.5ohm
Material: SS + Pyrex glass tube
Thread: 510 Thread
e-Juice Capacity: 2ml
eVic Basic MOD
Size: 22 x 32 x 55 mm
Battery capacity: 1500mAh
Output mode: RTC/VW/VT(Ni/Ti/SS316)/Bypass/TCR
Output wattage: 1- 60W
Temp range: 100 - 315℃/200 - 600F
Resistance range: 0.05 - 1.5ohm for VT/TCR modes; 0.1 - 3.5ohm for VW/BYPASS modes
It comes with
- 1 x eVic basic battery
- 1 x Cubis Pro mini Atomizer
- 1 x BF SS316-0.5ohm DL
- 1 x LVC Clapton-1.5ohm MTL
- 1 x USB cable
- 1 x Manual
- 1 x Warning card
- 1 x Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Ultimate compact with intuitive design
Real time clock & Custom logo function
Optimal Top airflow and refilling system
Dual battery protection and upgradeable firmware
Power on and off: Press the fire button 5 times in quick succession, the screen will on. Then it's ready to use. In the same way, the device will be turned off by pressing another 5 times in quick succession.
Vaping: Hold the fire button and inhale the mouthpiece. Release the fire button and exhale.
Charging and upgrading: Simply connect the device with a micro USB cable to charge or upgrade. When it's fully charged, the display will go out.
Set screen protection: When the device is on, simultaneously hold the fire button and the right regulatory button to enter into adjustment interface. Press the right button again to enter into screen protection time setting. Choose the protection time and press the fire button to confirm.
Reset: Should you get stuck while upgrade, just press the "+" button and then insert into the reset hole with a needle to restart.
Switch among different modes: Press the fire button 3 times to enter into the setting menu. Press the right regulatory button to switch among TEMP, TCR, Power and BYPASS modes. Press the fire button to confirm. And press left button while flashing to enter into subsidiary menu.
How to set the TCR: In power-off condition, press the fire button and right regulator simultaneously for about 5 seconds to enter into TCR set menu:
1. Press right/left regulator to choose between TCR M1, M2, M3;
2. Then press the fire button to select certain parameter;
3. Press the regulator to set the parameter;
4. Long press the fire button or leave it for about 10 seconds to confirm.
- It doesn't come with liquids, you shall buy separately.
- Compatible with BF Replacement Coil, BF RBA Head, NotchCoil DL Head, QCS Head and LVC Clapton MTL Head.
3 months of eVic Basic MOD. Please check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Click download to get certificate: CE, ROHS.
Our images are copyrighted. It is forbidden to reprint without our permission.