Kangertech CUPTI 2 80W TC Starter Kit
Kanger CUPTI 2 is an upgraded version with max 80W output and dual battery cells design. 5ml tank, various modes and extra atomizer connector will bring more vaping funs to you.
- Guaranteed:
-
- 100% Quality Guarantee
- 24 hours delivery
- 7 Days Money Back Guarantee
You may mix the following items to get bulk discount.
Shipping Restriction: Due to exclusive distributor of Kangertech, we could not send Kanger products to customers in Denmark and Ukraine. You can check more exclusive distributors .
80W Kangertech CUPTI 2 TC Starter Kit W/O Battery
Product Introduction
CUPTI 2 by Kanger integrated 5ml tank with dual battery cells design. With max 80W output and TC modes, users can use various wires for great vaping. The child lock system can prevent accidental operation. Moreover, upgradeable firmware will always keep the CUPTI 2 a new device. Three colors for selection.
Parameters
Capacity: 5ml
Size: 51.5mm (L) x 42.5mm (W) x 84mm (H)
Material: Zinc alloy and Al alloy
Drip tip: POM Black (can exchange)
Display: OLED
Output power: 5 - 80W
Temp control: 100℃ - 300℃/200F - 600F
Resistance: 0.1 - 2.5ohm
Coil: CLOCC SS316L 0.5ohm (DL); CLOCC NiCr 1.5ohm (MTL); Optional CLRBA
Charging port: Micro USB, DC 5V/1.5A (max)
Battery cell: 2 x 3.7V, 18650 discharge over 30A (NOT included)
It comes with
- 1 x Kanger CUPTI 2
- 1 x CLOCC SUS316L 0.5ohm
- 1 x Second connector
- 1 x USB cable
- 1 x Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
5ml e-juice capacity
80W output with TC mode
Two Replaceable 18650 cells
Strong Pyrex glass
Enhanced airflow valve
Child lock system
Fireware upgradeable
Customized mode
Extra tank connector
How to use CUPTI 2:
1. 5 speedy clicks to switch on/ off the battery.
2. After switched on, OLED displays "KANGER TECH" at standby mode.
3. Cell reverse protection, no power output when cell reversely installed.
4. Press fire button 3 times, choose your resistance wire Ni, Ti, SS, TC or pure wattage output.
5. For pure Ni, Ti, SS or TC resistance wire, you can set your desired coil temperature to fit your taste.
6. For power output mode, set your desired working wattage that best fits you.
7. Press + and fire button together to choose OLED display orientation.
8. Press - and fire button together can lock the up and down button once you have best setting.
9. Press + and - together for 2 seconds, you can enter temp curve and power curve mode.
10. Device software is upgradeable, you can customize the temp curve or power curve mode that best fits you.
11. You can modify the working interface/function display/screen brightness through program.
12. When 2 batteries hold different voltages, the indicator is subject to the lower value with "!" at the same time.
13. In case you change the coil or vape in other environment of pressing, you may need to calibrate the atomizer as well,New coil (+), Old coil (-) for best performance.
14. If no display of calibration:
a. screw off the CLOCC.
b. press the fire button till LCD display " check atomizer"
c. screw back the atomizer and press fire button again.
- It doesn't come with liquids, you shall buy separately.
- It doesn't come with 18650 batteries, which you shall buy separately. Please choose discharge over 30A 18650 batteries.
- You can buy CLOCC coils.
3 months. Please check Guarantee Policy.
Our images are copyrighted. It is forbidden to reprint without our permission.

This product has been sold in the USA before August 8, 2016 . You can check the sales record for confirmation.