Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step.Register and sign in your account to get bulk discounts!



KangerTech New Clear Cartomizer-- EVOD Glass Clearomizer.

  1. Bottom Filling
  2. Bottom heating
  3. Pure taste
  4. More vapor
  5. Dual coil
  6. Glass tube
  7. Removable Mouthpiece




  1. 1.5ohm coil unit installed. Replaceable dual Coil unit is here. You can also use Kangertech VOCC coils.
  2. eGo thread, it compatible with all eGo thread batteries.
  3. Glass Tube with a metal cover with 4 windows.
  4. It's an empty cartomizer, you still need order heavengifts e-liquids.
  5. It has a "KangerTech Glass" logo on the base connector.

Including
KangerTech 1.5ml EVOD Glass Dual Coil clear Cartomizer
1pc

Parameter
Resistance 1.5 +/- 0.2ohm
Length
74.5mm
Diameter
14.6mm

It contains four parts:Stainless Mouthpiece, Glass Tank, Dual coil unit and threaded connector.


How to refill the cartomizer:

1. Turn upside down the cartomizer body and fill in no more than 1.5ml e-liquid.

2. Carefully screw on the base connector(coil unit loaded) and clear surplus liquid.

3. Allow 1-2 minutes for the e-juice to feed into the coil before you start to vaping. Or Give the cartomizer a quick shake to make it faster.

4. Screw onto your battery and start vaping.


How to remove your BCC cartomizer from battery?

Hold the bottom of the clear cartomizer when you separate it from battery MOD. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.


How to replace the coil unit/coil head?

Turn upside down the cartomizer, then screw off the bottom base. Take out the old coil unit from the bottom base, replace with new one. So easy!


Using Tips:

  1. Make sure the cartomizer should be screwed back tightly onto eGo/eGo-T/eGo-C/eGo-C Twist battery.

  2. Be sure that the coil unit is screwed into the cartomizer tightly. If you get few vapor when you use, try to make the clear cartomizer upside down to let the fibre wick and coil get e-liquid, which are on the top of the cartomizer.

  3. When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!




Package
Simple packing. Customary Packing from the factory,the packing is subject to change without notice.