SMOK TF-RTA G2 Deck
SMOK TF-RTA Deck, G2 Deck and G4 Deck, are spare parts for SMOK TF-RTA Tank. One is quad-coil G4 Deck and the other with dual-post velocity G2 Deck.
Type: G2 Deck
G2 Deck comes with
- 1 x TF-RTA G2 Deck
- 1 x Allen Key screwdriver
- 2 x Replacement screws
- 2 x Sealing Rings
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
How to build the G2 Deck:
1. Before starting make sure your hands are clean.
2. Taking the TF-RTA G2 deck apart.
3. Installing the pre-wrapped coil. Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck.
Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the wick at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
- It's for SMOK TF-RTA Tank .
Our images are copyrighted. It is forbidden to reprint without our permission.