VapeOnly Aura Express Kit - 2000mAh

 

VapeOnly Aura Express Kit - 2000mAh, applied innovative top air intake and mouthpiece, the kit will give you a no leaking/ popping vape experience. Moreover, you'll enjoy more clouds and tastes with the TAC double coils. 0.33ohm coil provides constant 33W - 53W output and 0.5ohm 21 -53W output. No troublesome adjusting.

 

Parameters

Whole Size: 19 x 152mm
Atomizer Volume: 3ml
Coil option: 0.33ohm and 0.5ohm
Wattage output: 21-53W
Output Voltage range: 3.3-4.2V
Battery Capacity: 2000mAh
Material: Stainless steel, Pyrex Glass and Chrome plated brass

It comes with

  • 1 x VapeOnly Aura Battery - 2000mAh
  • 1 x VapeOnly Aure Atomizer - 3ml
  • 2 x TAC dual coils (0.33Ω, 0.5Ω)
  • 1 x Extra mouthpiece
  • 6 x Sealing rings
  • 1 x USB cable (1.5m)
  • 1 x User Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

 

 

    •    It doesn't come with e-liquids. You shall buy it separately.
•    Aura Mini is the winner of iF DESIGN Award 2016. Top air intake and , top filling design, maximizes the prevention of e-liquid leaking;
TAC dual coils, greatly enhances the volume of vapor and taste;
Innovative mouthpiece design, effectively preventing e-liquid popping into mouthpiece;
Clear and simple light indicators to show different battery modes;
Easy to operate, re-filling e-juice and change coils;
Built-in 2000mAh high quality lithium battery

 

 

 

 

Power on and off: press the button for 5 times in quick succession to turn on or turn off the battery;

Vaping: press power button and inhale (no longer than 10 seconds at one time). White LED light will illuminate when you press the power button and go out once you release;

Airflow adjustable: turn clockwise to increase airflow or anti-clockwise to decrease airflow;

Power warning: When the battery is on and the voltage is low, hold down the power button, the white and red LED light will flash 5 times each alternatively with the battery going to standby mode and not working. Then please charge your battery.

Charging: simply charge the mod by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.

Low Resistance Protection: When the battery is on, atomizer will not work if its resistance is lower than 0.3ohm when you press the power button. The white LED light will double flash 5 times with the battery going to standby mode.

Open Circuit: When the battery is on, if under open circuit situation or no atomizer is connected, the white LED light will have a single flash 10 times with the battery going to standby mode when you press the power button.

Overheat Protection: When the battery is on, hold down the power button, the red LED light will triple flash 5 times with the battery going onto standby mode if the temperature of the device is higher than the setting point.

Battery Overload Protection: When the battery is on, hold down the power button, the red LED light will double flash 5 times when the battery going onto standby mode if the voltage is lower than 3.5V, and the resistance is lower than 0.5Ω.

Our images are copyrighted. It is forbidden to reprint without our permission.

 

 

6 months.Please check Guarantee Policy.