Heatvape TC/VW Power Tube is a bang product released in the late half of 2015. Heatvape’s designers prefer manly and powerful elements. This 60W Power Tube is one of the typical representatives of these elements. Just from itsheavy net weight of 569g and full metallic appearance, the power tube would enchant a mass of male vapers. Its outside matte furnishing makes the Heatvapemod brilliant and dazzling. There are three colors which are black & red, silver and golden for you to choose from currently.
Powered by a single replaceable 18650 battery (not included), this unusual power tube mod features intelligent temperature control function. Its Ohm limit ranges from 0.1-1.0 Ohm in TC Mode, while 0.16-5.0 Ohm in Wattage Mode.The Heatvape device also has PCB temperature protection; it will decrease the wattage output to protect the mod from damage when the inner temperature is above 100°.
The threads of this mechanical feel power tube are very smooth, easy to screw on and off. Its creative 510 thread with adjustable cap can fit any 510 atomizer perfectly. The traditional LED lightdesign is applied for mode indication. It has 8 settings for both temperature and wattage.Press plus and minus buttons together for different output settings.
Heatvape Power Tube could be a perfect gift idea. The wooden packaging box is another highlight. The tube box is delicately craved with lines and Heatvape logo, looks top grade and fashionable. Besides, a lockable button on one side is very practical. This powerful Power Tube can be safely and tightly put in this box.
Size (diameter x length): 30 x 140 mm
Ohm Limit: 0.1-1.0 Ohm in TC Mode, 0.16-5.0 Ohm in Wattage Mode
Temperature Gear: 200-280-350-400-450-500-550-600 F
Wattage Gear: 10-15-20-28-36-44-52-60W
Colors: Black & Red, Silver and Golden
It comes with
- 1 x Heatvape Power Tube
- 1 x User Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
1. Eco-friendly Material
2. Digital Switch TC & VW Modes
3. Power Decreasing Design
4. Battery Capacity Indication
How To Use
1. Battery Assembly
Screw off the bottom cap and insert 1pc 18650 battery (flat top or button top). Screw back the bottom cap.
2. Power on/off
Press Fire Button 5 times continuously to turn on the device, the LED1, LED2, LED3 and LED4 will shine twice in a clockwise direction.
Another 5 presses on the fire button will turn off the device, the LED1, LED2, LED3 and LED4 will shine twice in a counter-clockwise direction.
3. Mode Selection
The Power Tube is semi an semi-intelligent temperature sensing device, it will detect the type of the attached atomizer automatically in most cases; in case the device cannot decide the type of the attached atomizer, please hold the Fire Button and LED1, LED2, LED3 and LED4 will shine continuously, then press PlUS Button if it is a new atomizer, otherwise press the MINUS Button.
When connected with a temperature sensing atomizer, the LED lights under the TC mark will shine continuously and stop at the pre-configured temperature, the LED lights under the NOR mark will display the real-time wattage.
When connected with a regular atomizer, the LED lights under the Nor mark will shine continuously and stop at the pre-configured wattage.
4. Parameter Setting
Hold the PLUS Button and MINUS Button for two seconds and the LED lights will shine in both TM Mode and Wattage Mode, then press PLUS Button the temperature bar can be adjusted; press MINUS Button and the wattage can be adjusted; press Fire Button to confirm the adjusting.
5. Atomizer Open
When the device is power on, press Fire Button and if the LED1 and LED3 will shine at the same time, this is to mean that the atomizer is not in good contact.
6. Short Circuit
When the device is power on, press the FIRE Button and if the LED2 and LED4 shine at the same time, this is to mean either the device or the atomizer is short circuited.
7. Battery Capacity Indication
When the device is power on, LED1 will shine if the battery capacity is below 3.5V.
When the battery capacity is 3.5V~3.7V, LED 1 and LED 2 will shine at the same time.
When the battery capacity is 3.7V~3.9V, LED 1, LED 2 and LED 3 will shine at the same time.
When the battery capacity is more than 3.9V, LED 1, LED 2, LED 3 and LED 4 will shine at the same time.
- No 18650 batteries included. You shall purchase separately.
- 510 threaded
- No USB port
Guarantee time: 3 months
Pls check guarantee policy.