Eleaf Aster RT with Melo RT 22 Full Kit - 4400mAh
Eleaf Aster RT is a skillfully designed “Recessed Tank" (RT) style compact mod that is able to hold and hide tanks up to 22mm diameter. It is pre-installed with the new firmware that has preheating functions and a custom logo as well as different interfaces for you to check your total puffs and total vape per seconds. The firmware is always upgradeable so you can keep on top of the latest features. The MELO RT 22 features its innovative “Retractable Top” (RT) solution too which makes e-liquid refilling the easiest and most convenient ever. With a diameter of 22mm, the tank pairs perfectly with the ASTER RT.
Size: 50.6 x 40 x 95.3mm
Thread type: 510 thread
Battery capacity: 4400mAh
Output wattage: 1-100W
Output mode: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes);0.1-3.5ohm (VW/Bypass/Smart mode)
Temperature range: 100－315℃/200－600℉(TC modes)
Maximum charging current: 1A
Maximum output current: 25A
Color: silver, white, black, grey, green
Melo RT 22
Thread type: 510 thread
E-liquid capacity: 3.8ml
Coil: ER 0.3ohm SS316 (40-100W)
Color: black, silver
It comes with
- 1 x ASTER RT
- 1 x MELO RT 22 (with ER 0.3ohm Head)
- 1 x ER 0.3ohm Head
- 2 x Seal Rings
- 1 x USB Cable
- 2 x User Manuals
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- It doesn't come with e-Juice.
- You can buy Aster RT MOD, Melo RT22, Replacement ER 0.3ohm Head separately. NOT compatible with ERL Heads.
New Recessed Tank style compact 100W MOD
Innovative retractable top filling solution
Preheat function and puff/second interface available
4400mAh for long sustainable battery life
Detachable Structure for Easy Cleaning
New ER 0.3ohm Head
Knurled Airflow Control Ring for Easy Grip
Dual Circuit Protection
How to use RT 22:
1. Drip a few drops of e-liquid directly into the coil to make it fully saturated before first use;
2. Screw the ER head onto the atomizer base tightly;
3. Put the glass tube on, and screw the top cap with mouthpiece on;
4. Push the retractable top open, slowly fill e-liquid into the tank through the hole, and then close the retractable top after filling;
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base;
6. Finally the Melo RT 22 is ready to use.
Power on/ off: Press the fire button 5 times in quick succession to turn on/off the device. Keep holding the fire button to take a puff when the device is powered on.
Stealth on/Off: Press the fire button and down button simultaneously when the devic is powered on to switch between stealth on and stealth off mode. In stealth on mode, you can vape with the OLED screen off and you can press the fire button one time to check current setting.
Adjustment buttons lock/unlock: Keep pressing up and down button simultaneously for 2 seconds when the device is on, the up and down buttons will be locked and screen will display "Key Lock". In the same way, the up and down buttons can be unlocked and the screen will display "Key unlock".
Switch display mode: Keep pressing up and down button simultaneously for 2 seconds when the device is powered off, the screen display will rotate 180 degrees.
Switch display interface: In power-on state, choose VW mode; keep holding up and fire buttons till current interface flashes; when it's flashing, press up or down button to switch among different interfaces; finally press fire button once to confirm the interface you choose.
Preheat function: In power-off state, keep holding up and fire button till M1 mode appears; press the fire button 3 times to "Pwr", and press up or down button to adjust the wattage of preheat; press the fire button again to "Time", and press up or down button to adjust the second of preheat or turn off the preheat function.
Switch vaping modes: When the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. press up or down button to switch among VW/BYPASS/SMART/TC-Ti/TC-Ni/TC-SS/TCR-M1/TCR-M2/TCR-M3 modes and then press the fire button one time or stay in the interface for about 10 seconds to confirm the vaping mode you choose.
Guarantee period: 3 months for Eleaf ASTER RT MOD. Please check Guarantee Policy.
Click download to get the certificate: CE, RoHS.
Our images are copyrighted. It is forbidden to reprint without our permission.