80W Eleaf iStick Pico Mega TC Kit W/O Battery
Eleaf iStick Pico Mega TC Kit , max output 80W, supports VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode. With 4ml capacity, top filling and hidden adjustable airflow, Eleaf Melo 3 is the best match for iStick Pico Mega.
The iStick Pico Mega can be powered by a 26650 cell or a 18650 cell when inserted with the battery sleeve. With a 18650 battery, the max output power is 75W; Max ouput power can be 80W only when 26650 battery is high rate (continuous discharge current should be above 35A).
Pico Mega Mod
Size: 53.5mm x 31.5mm x 73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A);
High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes); 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃(200-600℉) (TC modes)
Color: Hot pink, black, grey, silver, white
Melo 3 Atomizer
Thread Type: 510
Suitable voltage: 3V - 8V
Material: 304 stainless steel
Pico Mega Kit comes with
- 1 x iStick Pico mega
- 1 x Melo III Atomizer
- 1 x EC NC 0.25ohm Head
- 1 x EC 0.3ohm Head
- 1 x EC 0.5ohm Head
- 4 x Seal ring
- 1 x Battery Sleeve
- 1 x USB cable
- 2 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
80W Max Output
Replaceable 18650 Cell/ 26650 cell
Elegant appearance in 5 colors
Top filling and hidden adjustable airflow
Unique bottom design
How to add liquid
1. Unscrew the top cap off the atomizer;
2. Slowly refill e-liquid into the glass tube;
3. Screw back the cap onto the Melo III.
a) Please don't overfill or add e-juice into the air pipe.
b) Please first drip a few drops of e-liquid directly into the pure cotton wick in the atomizer head so as to make it fully soaked before vaping.
How to replace atomizer head
1. Screw the base off atomizer firstly.
2. Screw off the atomizer head from base and replace a new one.
How to adjust airflow
You can adjust the airflow by rotating the airflow control ring on the atomizer base, clockwise to increase and counterclockwise to decrease airflow.
Power on and off: Press fire button 5 times continuously to turn on/off the device.
Vaping: Long press the fire button and take a puff.
Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.
Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.
Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.
Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.
How to charge: You can take out the lithium-battery from the device and then charge the cell itself. Moreover, it can also be charged in the iStick Pico via USB cable.
- You can select the e-juice here.
- It doesn't come with 18650 lithium-battery or 26650 battery.
- You can buy Eleaf EC coils 0.3ohm/0.5ohm, 0.15ohm Ni200, 0.5ohm Ti and ECR coil.
With a 18650 battery, the max output power is 75W; Max ouput power can be 80W only when 26650 battery is high rate (continuous discharge current should be above 35A).
Please check Guarantee Policy.
Guarantee period: 3 months for the Pico Mod.
Our images are copyrighted. It is forbidden to reprint without our permission.