Joyetech eVic-VTC Mini Express Kit W/O Battery (No Wall Adapter)
Joyetech eVic-VTC Mini Express Kit W/O Battery (No Wall Adapter), best temperature control MOD with the best size which provides the best experience for vaping ever! . Both VT and VW functions available: VT-Ti (titanium), VT-Ni (Nickel 200) and VW modes applied. It brings new experience of VT control, a new flavor with every change of temperature setting, also battery performance being prolonged at the same time. Same with its full kit, only no wall adapter.
Size: 22.20 x 38.20 x 82.00mm
Output mode: VT-Ti/VT-Ni/VW mode
Output wattage: 1-60W
Resistance range: 0.05 - 1.0ohm for VT mode
0.15 - 3.5ohm for VW/Bypass mode
Temperature range: 100 - 315℃ / 200 - 600℉
It comes with
- 1 x Joyetech eVic-VTC Mini MOD W/O Battery
- 1 x Micro USB cable
- 1 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. 3 Modes：VT-Ni, VT-Ti, Traditional VW;
2. Support with Pure Nickel(Ni200, made in USA) and Pure Titanium wire, and 100% organic cotton;
3. 60W, 8V with upgradeable firmware.
4. Save huge of battery and liquid consumption without a dry hit
5. Enhance flavor experience with the change of temperature settings by displaying in the big OLED screen;
6. This VT battery not only supports our suggested VT heads, but also supports all other VT atomizers and heads.
7. This VT atomizer not only matches with our VT battery, but also matches with all other VT batteries.
Press the fire button 5 times in quick succession to turn the device on/off.Slide down the battery back cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick sucession to turn the device on and off.
Recommends: high-rate 18650 cells, for example, Sony US 18650VTC4
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch between Stealth on and Stealth off function.
In Stealth on Mode, you can vape with the OLED screen off. To quick see your settings in stealth on mode, you can tap the fire button to display the settings.
Adjustment Lock function: While the device is on, simultaneously press the two regulatory buttons.This will switch between Adjustment Lock and Adjustment Unlock function.
In adjustment Lock mode, the regulatory button will not function to prevent accidental VT/VW/Bypass setting adjustments.
1). Lock/unlock the atomizer resistance in VT mode: press the fire button for three times to enter into menu and urn the control knob to the left side 2 times. The third row will blink. Turn the control knob to the right to lock or unlock the resistance of the atomizer;In VW mode output wattage can be adjusted from 1W-60W by pressing the regulatory button. Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.
2). New atomizer coil installation: when replacing a new atomizer, it may require resetting of the atomizer “base resistance”;
3). Wattage Adjustment in VT Mode: wattage can be adjusted in VT mode. Press the fire button 3 times to enter the menu. Turn the control knob to the left, and the second row will blink. Then turn the control knob to the right to adjust the wattage, and press fire button to confirm.
in VW mode, you can adjust output wattage between 1W-60W by turning the control knob, right to increase, and left to decrease. Shift Among Battery, Time and Puff: Press the fire button three times to enter the menu. Turn the control knob to the left side 3 times, and the fourth row will blink. Now turn the control knob to the right side to shift between Battery charge remaining(%), Time(seconds) and Puff Records Modes. To reset the Time and Puff records, please hold down the fire button, while the Time or Puff mode is still flashing.
The ideal output wattage in VT mode should be 30-60W, because when the output wattage is below 30W, it is difficult to reach 450˚F;
VT mode only supports a maximum of 1.0 ohm. The device will automatically switch to VW mode when the resistance is larger than 1.0 ohm;
When using a new VT atomizer head, please drip a few drops of e-juice in the cotton of atomizer head and guarantee it is moist before the first use to reach the best performance.
- It supports Titanium(Ti) and Nickel(Ni200) Wire, eGo ONE CLR Head, Delta 2 LVC Head & Delta 2 RBA Coil;
- It doesn't come wit liquids, you shall buy separately.
It doesn't include a wall adapter.
3 months for battery. Pls check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.