Joyetech eVic VTwo Mini Express KitTPD Compliance
Joyetech eVic VTwo Mini, a new version of eVic-VTC Mini, is more attractive in appearance. eVic VTwo Supports RTC/VW/VT/Bypass/TCR modes. Variable colors for your selection.
- 100% Quality Guarantee
- 24 hours delivery
- 7 Days Money Back Guarantee
You may mix the following items to get bulk discount.
USD 45.60 USD 73.00
USD 25.20 USD 39.00
USD 16.20 USD 20.00
USD 55.90 USD 83.90
USD 53.00 USD 79.00
USD 99.00 USD 148.50
USD 38.20 USD 55.00
USD 25.00 USD 37.50
USD 66.00 USD 80.00
USD 69.90 USD 84.00
1. Joyetech now requires S/N (serial number) before providing replacements (due to counterfeits in market). We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
2. Shipping restriction: Due to exclusive distributor of Joyetech, we do not send Joyetech products to customers in Russia, South Korea or UK. You can check more exclusive distributors .
Joyetech eVic VTwo Mini Express Kit W/O Battery
Joyetech eVic VTwo Mini, a new version of eVic-VTC Mini, is more attractive in appearance. Supporting RTC/VW/VT/Bypass/TCR modes, eVic VTwo combines unique styling with a large OLED screen. It also features upgradeable firmware, dual battery protection and real time clock display. Variable colors for your selection.
Size: 22.20 x 38.20 x 82.00mm
Output mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR(M1, M2, M3)
Output wattage: 1-75W
Resistance range: 0.05 - 1.5ohm for VT mode
0.1 - 3.5ohm for VW/Bypass mode
Temperature range: 100 - 315℃ / 200 - 600℉
Colors: orange, blue, white, burgundy, black, gold, cyan, grey, red
It comes with
- 1 x Joyetech eVic VTwo Mini MOD W/O Battery
- 1 x USB cable
- 1 x eVic-VTC Mini Skin
- 1 x Manual&Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Real time clock display & screen protection
RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR modes
Dual circuit protection
Replaceable battery and magnetic battery cover
Spring loaded 510
Convenient USB charging
Press the fire button 5 times in quick succession to turn the device on/off.Slide down the battery back cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
Recommended: high-rate 18650 cells, for example, Sony US 18650VTC4
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Set Screen Protection Time: While the device is on, simultaneously hold the fire button and the left regulatory button to enter into the LED Color interface. Then press the right button again to enter into Screen Protection setting, and press Left button to choose the time. Press the fire button to confirm the choice.
Adjustment Lock Function: While the device is on, simultaneously press the two regulatory buttons.This will switch between Adjustment Lock and Adjustment Unlock function.
In adjustment Lock mode, the regulatory button will not function to prevent accidental VT/VW/Bypass setting adjustments.
Switch the Display Mode: Simultaneously press the two regulatory buttons in power off state, the display will rotate 180 degrees.
Shift among Modes:
Press the fire button for three times to enter into menu . The 1st row will blink. Press the right button to switch among TEMP, TCR POWER and BYPASS mode. Press the fire button or leave it blink for 10s on the current setting to confirm and exit the menu.
Under TEMP, TCR mode, while flashing, press the left button to enter into the subsidiary menu: VT, PWR, COIL and AMP.
While adjusting VT, press the right button to switch among Temp NI, TI and SS316/M1, M2 and M3 mode. Press the fire button to confirm.
When AMP row is flashing, press the right button to switch among AMP, PUFF and TIME.
Under POWER, BYPASS mode, press the left button to enter into the subsidiary menu.
In power-off condition, Press the fire button and right button for 5sto enter TCR set menu. Under TCR mode, while mode indication flashing, press the left button to enter into the subsidiary menu, sub menu will flash, press the right button to switch and press the fire button to confirm.
Under TEMP, TCR mode, temperature can be adjusted. Long pressing the right or left regulatory button will make the temperature setting rapidly increase or decrease.
In VW mode output wattage can be adjusted from 1W-60W by pressing the regulatory button. Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.
New atomizer coil installation: when replacing a new atomizer, it may require resetting of the atomizer “base resistance”;
Wattage Adjustment in VT Mode: wattage can be adjusted in VT mode. Press the fire button 3 times to enter the menu. Press the left button, and the second row will blink. Press the right button to increase the wattage, and press fire button to confirm.
The ideal output wattage in VT mode should be 30-75W, because when the output wattage is below 30W, it is difficult to reach 450˚F;
VT mode only supports a maximum of 1.5ohm. The device will automatically switch to VW mode when the resistance is larger than 1.5 ohm;
When using a new VT atomizer head, please drip a few drops of e-juice in the cotton of atomizer head and guarantee it is moist before the first use to reach the best performance.
- It doesn't come wit liquids, you shall buy separately.
- It doesn't include a wall adapter.
- You can download CE, EMC and RoHS certificates.
3 months for eVic VTwo Mini MOD. Pls check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Our images are copyrighted. It is forbidden to reprint without our permission.
Share your thoughts with other customersWrite a Review
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?