KangerTech EMOW Starter Kit
KangerTech EMOW Starter Kit is the latest electronic cigarette kits from KangerTech. 5 colors for your selection. Both the battery and cartomizer are newly designed with Stainless Material. It will bring you new vaping experience than ever.
Length(battery and cartomizer): 151.50mm
5 colors available:Blue, Steel, Black, Brown and Cherry Red
4 plug types available:US plug, EURO plug, UK plug and Australia plug
The kit comes with
- 1x battery (1300mAh)
- 1x clearomizer(1.8ml)
- 5x coil unit(1.5ohm)
- 1x adpater
- 1x USB cord
- 1x manual
Simple packing. Customary Packing from the factory,the packing is subject to change without notice.
1. The cartomizer comes with eGo thread and the battery comes with 510/eGo thread, it can work with 510/eGo thread cartomizers.
2.No e-Juice e-Liquid included. You still need order heavengifts e-liquids here.
3. You can choose the Aerotank EMOW cartomizer here.
4. You can choose the replacement coil unit here. And the resistance value needs to be 1.5ohm~3.3ohm.
5. There is CE mark on the e-cig battery connector.
Battery safe hole design. Upgrade Dual Coil. Upgrade Airflow Control Valve V2
1. New EMOW VV Battery 1300mAh.
2. New Aerotank EMOW cartomizer
3. Pyrex Glass + Stainless Material
4. Upgrade Dual Coil (Stainless Steel)
5. Upgrade Airflow Control Valve V2
6. Low Resistance
7. Huge Vapor
8. The battery bottom comes with a safe hole design
1) How to turn on the battery
The EMOW battery comes with 5-click protection: Generally, the battery is shipped in the off position. In off position, the battery will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see colorful LED blink 3 times. To turn off battery, press manual button 5 times within 2 second as well, the colorful LED will also blink 3 times! "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
Specially, you can adjust the battery's output voltage by pressing the button 3 times in one second while the LED light will blink 3 times. 3.7V(Red light), 4.2V(Green light), 4.8V(White light)
There is a sticker on the battery for power on guidence. Please remove it before use.
When the battery power is low, the battery LED flashes 15 times continuously while pressing the button, pls get the battery charged immediately.
To charge the battery, pls gently screw the battery into the USB charger. Plug the USB charger into the USB port of an AC-USB charger or a computer. It takes about 4 hours to fully charge the battery.
1.You should use only the dedicated USB charger for the battery.
2. Pls Fully charge the battery before using to maintain a good battery life span.
3) How to fill in e-juice
1. Turn upside down the cartomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 1.8ml e-Liquid. Do not overfill it.
3. Carefully screw on the connector, connect it with the battery and enjoy it.
4) How to control the Airflow
When the hole and groove are overlapped, rotate the hole from left to right to get bigger airflow which reaches the Max on the rightest side. If the hole and the groove are not overlapped, the airflow is locked and no vapor comes out.
5) How to replace the coil unit/coil head
Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!
How to remove your BDCC cartomizer from battery?
Hold bottom of the cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.
Guarantee(Please check Guarantee Policy)
Guarantee period: 6 months for batteries, no warranty for the rest spare parts.
Our images are copyrighted. It is forbidden to reprint without our permission.