Shipping cost will be calculated automatically after you choose shipping destination in the checkout step.Register and sign in your account to get bulk discounts!


SMOK Pyrex RSST Rebuildable Genesis Style Atomizer - 3ml

It is the newest rebuildable genesis atomizer with stainless steel and Pyrex glass tube. It comes without a wick or coil for those that like to build their own for the ideal vaping experience they are looking for.

The center pin is spring loaded and adjustable to make sure you always get a good connection with the device you are using. The RSST comes with extra
O-Rings, filling caps, and a spring and a washer for the center pin. It has a 510 connection and works with 510/ eGo batteries.




Notice: Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

No warranty!



Including
Drip tip 1pc
Top cap 1pc
Center pin (with 3 tiny parts)
1pc
Top connector (with a bolt and a filling cap) 1pc
Pyrex Glass tube 1pc
Center pole 1pc
Bottom connector
1pc
O-Ring, filling cap, spring and washer
8pc

Size:
Length: 74mm
Diameter: 22mm





Basic using instructions:

  1. Remove the top cap.
  2. Loosen the ground screw.
  3. Loosen the center pin to gain access to the tank.
  4. Feed wick through the hole.
  5. Rebuild the unit. Be careful not to screw the center post down too far as it is the center post that connects to the battery/device.
  6. Attach one of the wires from the wick to the ground screw.
  7. Attach the other wire to the center pole by pressing down the spring and wrapping the wire to the post.
  8. Trim excess wire away from the post.
  9. Remove the small filling cap and fill the tank.
  10. Allow time for the wicking material to absorb the e-liquid.
  11. Attach the RSST to your device and vape.
  12. Keep the device and tank upright at all times to avoid leaking.
  13. When removing the tank be sure to hold the bottom ring to loosen. Otherwise the tank may come apart.










Package:
Simple packing. Customary packing from the factory, the packing is subject to change without notice.