SMOK Spirals Tank 2mlTPD Compliance
SMOK Spirals comes with 22mm diameter and brand new coils with large size and precise wicking hole. You will enjoy powerful and charming taste. 6 colors.
- 100% Quality Guarantee
- 24 hours delivery
- 7 Days Money Back Guarantee
You may mix the following items to get bulk discount.
USD 41.00 USD 50.00
USD 41.00 USD 61.50
USD 34.10 USD 42.00
USD 21.22 USD 26.00
USD 37.80 USD 46.00
USD 51.80 USD 64.80
USD 36.68 USD 45.00
USD 36.70 USD 45.00
USD 45.00 USD 54.00
USD 59.00 USD 71.00
Shipping restriction: Due to exclusive distributor of SMOK, we do not send SMOK products to customers in Australia, Paraguay, Poland, Russia, Denmark, Netherlands, Czech, Slovakia or Ukraine. You can check more exclusive distributors .
SMOK Spirals Tank - 2ml
SMOK Spirals is a 22mm diameter with built-in large size coil head adopts Japan imported cotton, brand new coil and precise wicking hole.Together with adjustable small size air slots and elongated drip tip, all that makes it to be a taste whirlwind that offers you authentic, powerful and charming taste. The Spirals tank brings your impressive experience.
Size: 22 x 48mm
It comes with
- 1 x Spirals Tank
- 1 x 0.6ohm dual core (pre-installed)
- 1 x 0.3ohm dual core
- 1 x RBA coil (single coil deck)
- 1 x Replacement glass tube
- 1 x User Manual
- Spare parts
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- It doesn't come with liquids, you shall buy separately.
- You can buy replacement Spirals coil and Spirals RBA coil.
- 510 thread
- You can download certificates.
New large coil head
Adjustable small size air slots
Elongated delrin drip tip
Top filling system
How to fill e-Juice:
1. Hold the tank with one hand, and use another one to press top cap and move it clockwise.
2. Add e-liquid through the slot, and pay attention not to drip in the central airflow;
3. Close the cap carefully and firmly. Then let it stands for several minutes to get the organic cotton completely saturated.
How to build the RBA:
1. Before starting make sure your hands are clean.
2. Taking RBA deck apart.
3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.
5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
Our images are copyrighted. It is forbidden to reprint without our permission.
Share your thoughts with other customersWrite a Review
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?