Think Vape Finder 167W TC Box MOD with DNA250 Chip W/O Battery
Think Vape Finder 167 is an advanced vaping gear, which adopts the latest Evolv DNA 250 chip. It directly measures and limits the temperature of the heating coil during operation. The Finder also allows you to save and select between eight groups of output settings. Moreover, you can check and set your vaping with the Escribe. 3 colors for your selection.
Size: 30 x 92 x 55mm
Chip: Evolv DNA 250 chip
Power range: 5W to 167W
Temperature range: 100°C to 300°C or 200°F to 600°F
Input voltage range: 9V to 12.6V
Output voltage range: 0.5V to 9.3V
Maximum output current: 55A
Battery: Dual 18650 batteries (not included)
Charging: 2A Micro USB charging
Material: Zinc Alloy, Carbon Fiber, Genuine Leather, SS connector & abalone shell, toughened glass
It comes with
- 1x Think Vape Finder 167W Mod
- 1x USB Cable
- 1x English Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
- 510 threaded
- No 18650 battery included. You shall purchase it separately.
Powered by DNA 250 Chip
Fast 2A Micro USB charging
Fully customize with Escribe software
Various safety protections
510 stainless steel threaded
Power on/off: Press the fire button five times in quick succession to turn it on. In the same way, it can be turned off.
Locked mode: Pressing the fire button 5 times with less than 7 seconds will cause the device to enter locked mode. To exit locked mode, press the fire button 5 times.
Power locked mode: Holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change the power setting. To exit Power Locked mode, hold the up and down buttons for two seconds.
Resistance lock: While locked hold both the fire and up buttons for two seconds to enter Resistance Lock mode. To disable resistance lock, repeat the procedure to unlock it.
Shift between VW/TC mode: Pressing the fire button 5 times, the device will directly enter VW mode. You can adjust the output wattage from 5W to 167W by pressing up or down button. In this mode, holding both the up and down buttons simultaneously for two seconds will enter TC mode. In TC mode, you can adjust temperature from 200F to 600F or 100C to 300C. Press the fire button or leave the display for 10 seconds on current setting to confirm and exit the TC mode. Then Pressing the fire button 5 times, the device will enter VW mode again.
Charging: You can take out the lithium-batteries from the device and then charge the cells. Moreover, it can also be charged via USB cable.
Our images are copyrighted. It is forbidden to reprint without our permission.
6 months for Finder 167 MOD. Please check guarantee policy.