150W Vape Forward Vaporflask Classic TC Box MOD W/O Battery

 

Product introduction

Vaporflask Classic TC 150W, a co-branding product by WISMEC and Vape Forward, features variable temperature supporting Ni, Ti and SS coils, upgradable firmware, easy to operate user interface and an interchangeable magnetic battery cover. It can be powered by dual external 18650 batteries to reach to max 150w power output. 3 colors for your selection.

 

Parameters

Size: 62 x 27.2 x 92 mm
Thread Type: 510 thread
Cell type: High-rate 18650 cell(discharging current should be above 25A )
Output Mode: TC-Ni/TC-Ti/TC-SS/VW Mode/TCR
Output Wattage: 1-150w
Resistance Range:0.05-1.5ohm for TC mode; 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/ 200-600°F

It comes with

  • 1 x Vaporflask Classic
  • 1 x USB cable
  • 1 x User manual
  • 1 x Warranty card

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

  • It can only be shipped to the United States.
  • It doesn't include a 18650 battery cell. We suggest you use constant discharge current 25A battery.

150W Vape Forward Vaporflask Classic TC Box MOD W/O Battery

 

150W Power
Temperature control
Upgradable firmware
Optional:TC-Ni/TC-Ti/Ti-SS/BYPASS/VW/TCR mode

Power on/off: press the fire button 5 times in quick succession to turn the device on and off. 

Stealth function: While the device is on, simultaneously hold the fire button and the up button. This will switch the screen display on and off. 

Resistance locked function: While the device is on, simultaneously hold the fire button and the down button to enter resistance lock mode. To disable resistance lock, repeat the procedure. (It should be carried out at room temperature.)

Adjust lock function: While the device is on, simultaneously press the up and down buttons. This will lock and unlock the adjustment button functions. 

Micro UBS port function: The USB port can be used for charging and upgrading firmware. It is better to take out the battery cells to charge. 

Switch the display: By pressing the up and down buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. 

Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR mode: When the device, powered on, press the fire button 4 times in quick succession to enter the mode switching state. By pressing the up or down buttons to shift among VW/Tc-Ni/TC-Ti/TC-SS/TCR M1, TCR M2 and TCR M3 mode. 

3 months of Vaporflask Classic MOD. Please check guarantee policy.

Our images are copyrighted. It is forbidden to reprint without our permission.